Monthly Archives: January 2024

Jan 2024 – Antenna update at the QTH

Posted on by

With some rather nice weather and available time, I was able to get to work on putting up the SOTABeams Travel Mast as a repacement of the DX Commander classic mast which has done me so well for serveral years, and one of the guying rings finally sucumbbing to the storms we had at the start of the month.

Use of electrical tape and jubilee clip to secure mast sections vertically

I put electrical tape and a jubiliee clip on each section to secure and make vertical slipping less of a possiblity. The same method worked very well for the DX Commander in keeping the sections up and those had to take a considerable strain when used in the way to use the split-dipole that the DX Commander is.

Wire up about 2/3s of the full mast height

I attached the wire to the mast via a piece of guying rope about 2/3’s up the mast. I may make this higher the next time I move the antenna, but as is, it clears the house nicely and is a good distance from the ground, I think more height will allow a full half-wave on 20m so something I want to do very much, given I enjoy SSTV on the 20M band alot.

guying and little strain

There is very little strain on the mast and a good level of taughtness to keep the wire from drooping and touching the house, the one set of guying wires are holding the mast very well, combined with some decent ground stakes.

I went into test the mast, 20M SSTV was simply flooded with QSOs – unable to get a QSO in as the band was so buys, but I guess thats a good thing showing that the reception was doing well. I jumped on FT4 on 10M as the band was well open.

FT4 on 10M doing very well on the EFHW antenna

I was very please to test the antenna and have a FT4 contact with JS9DS in St Lucia over 4000 miles away !

I’m very pleased with the mast and will improve upon it as the weather and mast moves to allow us to use the front garden more. Looking forward to catching you on the airwaves !

mast update at the QTH

G-0112 – Bolderwood New Forest, Alex Loop to the rescue

Posted on by

With another bright but cold day, it was a good time to get out and get on the air. This time I was packing my trust Alexloop Ham pack antenna along with the IC705, determined to make an activation on my 3rd attempt from Bolderwood.

WX – I caught the ‘warmer’ part of the day at round 9 to 7 celsius

I was no sooner out the car and onto one of the many available benches and quickly setup. The alex loop was out the bag and with a bungee hook strapped pretty tightly to the bench. I tuned for 20m and got a great SWR of between 1.3 and 1.4 but no more than 1.5 and 10W of power. The FT8 contacts came rolling in, and with a busy 20m FT8 was then onto FT4, for even quicker overs.

Alexloop Setup
Manual Logging

It was great to get a mobile phone signal as I tethered my laptop to the phone wifi and could upload my contacts directly to QRZ via the excellent grid tracker application, I still kept a manual log so it would be easy to confirm the order and QSO’s I had today. The Reverse Beacon Network and POTA app was doing me a great service, as quite a few of my contact were POTA hunters. Getting 10 contacts in under an hour was great given just how cold it was, it was nice to see 5 of the contacts are POTA hunters.

I gave SSTV a go, but the signal where coming in thick and fast, I started to see a response to my transmission, but another station came in over the top. I try to use Robot72 and BW12 to keep my over time on 14.2300 short, but most people dont QSY on SSTV, and even then we tend to get other people talking over the SSTV CoA on 20m as well..

Still, having uploaded my ADIF file from WSJTX to POTA I was soon awarded my 2024 activation. Just in the nick of time ! A good start to POTA in 2024 !

POTA 2024 Award – a good start to the year

I am really excited about getting out and do more POTA – its a great start to the year !

73, Alan 2E0FWE

POTA from G-0112, cold but worth the effor

SOTABeams masts and WSPR Scraping

Posted on by

Good news on several fronts today – the replacement parts I ordered just days ago from Sotabeams have arrived, and amazingly I ordered the correct parts. I now have a fully functioning Sotabeams Travelmast again !

Sotabeams travelmast restored to operational !

Previous testing of Sotabeams travel mast at home, before I went out and snapped it 🙁

I found another Sotabeams mast in the garden, in this case a Whip10000, its probably been sat outside in all weathers for at least a year, if not two ! upon cleaning it up, I managed to get all the parts apart from one, which has stuck fast ! How do i get this unstuck ?!

mast section wont budge
stubborn section

I also planned over the holidays to get the WSPR scraping on the webtechnologies set up again, as since last year the format on the ‘old db’ changed, which caused my webscraping program to fail. I decided to re-write from scratch and use Python’s panda’s functions to scrape and sort the data. With a bit more Postgres changes I was then able to push data in again !

Webtechnologies WSPR scraper is back !

As time and interest allow I will add more functions as I enjoy the programming and representations of data in different formats from actual transmissions. When I’m 100% sure the code is working correctly, I’ll post the updates to github.

So a quick update and am looking forward to using the SOTA Masts for at the QTH and for POTA activations !

73

Alan / 2E0FWE

First POTA of 2024 – G-0112 New Forest (again)

Posted on by

So with new choke packed away and bringing the battery pack, i headed out to Bolderwood in the New Forest, arriving at around 10:15, it was still pretty quiet and I had pick of parking spaces and benches.

bolderwood on New Years Day 2024

I then setup the IC705 with the Toybox antenna and radials, which I found getting the radials out much easier this time. I was able to get the SWR down on 17m to a 1.6~1.7.

SWR less today
radial spread
much easier than yesterday

With the antenna setup I then connected the 705 without the MAT Tuner to start with, having the large battery with me was really good as it support the LC IC705 bag nicely keeping the antenna and bag vertical. I then went about attachign the choke-wound usb cable to the laptop.

Uh oh.. this doesnt look good

As soon as the USB cable was attached, the QRM returned ! I could hear the FT8 stations coming into WSJTX without problem, but again when hitting transmit, the audio disconnected. Whilst the QRM was much reduced, there was no doubt it USB cable and laptop was still effecting the radio. I went ahead and the MAT autotuner, to see if that improve the situation, i.e. would it act as any kind of choke between the radio and antenna.

MAT Tuner working great
could I try a choke here
Will I ever make a contact ?

The introduction of the MAT Tuner had no effect on the QRM, although I could see that with the longer coax between the tuner and antenna, I could potentially try putting chokes on here also. I disconnected the radio and just tried calling CQ on 17m QRP frequency, but to no avail. I could pull in signals and I tried jumping on the back on other QSO’s but think I wasnt getting out at all with the little whip antenna.

So I think whilst I have other options, I will explore those as well, I have always done well with the magloop, and its a great antenna, but the one I really want to try is the UK Antenna 40M EFHW, but currently my SOTA Beams mast is damaged from its first and only outing. I explored the website and was able to order the 3 replacement broken parts, which only cost £17.28 with 1st class postage.

The 40M EFHW UK Antenna – the next one to try when the replacement mast parts arrive…

I will continue experimenting with chokes and the Toybox antenna at the QTH before going back out with it again, I think with enough power, it would work well as a portable antenna, with QRP/10W,its giong to be hard work to get on the air with it…

Until the next time, 73s !

2E0FWE