IC705 Fixed, but a P***ED off POTA

Having ordered the replacement USB C board from the US of A it arrived in no time at all via FED-EX and folllowing the video it was pretty straight forward.

replace USB board on IC705

Getting the screws out from the IC-705 was pretty straight forward. I took care with the screen handling and used enough pressure but no more to get the long body screws out.

The next step was to remove the original IC-705 USB board. These screws where *very* tight and gave a distinct *lock-tite* screw thread lock when pressure was applied. So much so one of the screws was very stubbon to remove. Using a mixture of a torx screw head and flat-bladed with a couple of hard knocks budged the obstant screw!

With the board free it was time to flip off the micro connector, i used my finger nail which worked pretty well.

Withthe original D-Type IC705 USB board free, it was time to fit the replacement. Making sure to get the aligment of the board in relation to the sockets correct, it was easy enough, but again taking care with the lock, to fit.

I setup WSJTX and ‘borrowed’ the WSPR 6btv antenna for some testing. All was good ! With plenty of reports and 2 contacts, i was happy the board worked perfectly and could head out to go PoTA !

A P***ED OFF POTA

On a glorious sunny day down here in Dorset, I headed to the new forest. I setup my Alexloop and Macbook for FT8, but was getting loads of noise. As ever these thigns always happen out in the field ! Not to be detered I went back to the iphone app just to see if i could get some POTA hits. I did learn a nice feature of chaning the DX code so it can be CQ POTA from the iphone app. After 20 minutes of calling I had not a single response ! I checked with PSK Reporter and for sure I was getting out and the RBN on POTA page, i was there, but no contacts !

By this stage I was getting hot, bothered and felt like I was wasting my time. I decided to pack up and I’m going to re-think my POTA strategy. I need a better way of getting more contacts and on the air. I think I’m going to drop anything to do with computers/phones, only for use with the self spot on the POTA app. I think there is even a way with APRS to POTA Self Spot.. Anyhow, i packed up and headed home, then had a fantastic afternoon out with XYL 🙂 POTA can be tried another time !

Melcombe Horsey was so much more relaxing than POTA…….

Not quite a POTA activation and a poorly IC705!

I headed out mid-morning to what is a nearby POTA activation site, Avon Heath, thinking I’ve found a nice place to park and activate from. I was some what bemused that when i got into the car park it was stated ‘permit holders only’. No wonder this place hasnt been activted more often ! I headed off to the New Forest, which was another 15 minute drive away, but with plenty of FREE parking!

Avon Heath Park – No free parking for you !

Haven driven to the New Forest, I took the first designated car park on the route in, it was a new one for me to do POTA from and wasnt disappointed. A nicely sized car park and plenty of nature / trees around, it was a great place to do radio from !

I think it has been the first titme I’ve been out in the Bongo for POTA in a while (at least since I had it fixed up) having previously been to Boudlerwood and using the table and chair their previously, it was nice to setup and operate from the Bongo as there was some light drizzle later on as well. The Alex loop on bike stand configuration worked really well and held in place by the rear wheel of the bongo.

Today I was going to stick to FT8/4 on my iphone, as I had used this app when I had an ipad and it worked well. On the phone obviously the screen was a little smaller, but still ok to have FT8 and FT4 QSO’s. The POTA Spotting really helped with POTA activators (hunters) looking me up. I was also pleased to make a park to park !

I had problems getting the log off via email (didnt arrive) and upload to icloud (out of space, not paying apple for more), so I used the excellent POTA manual logging page. It was then it became apparent that I had a duplicate QSO in the log, and I had only managed 9 contacts, not the 10 I needed for an activation ! How frustrating, it goes to show that my method of writing down QSO’s on good old fashioned paper would of caught this out.

I headed back home and to see if I could get my iMac thinkpad to hook up to the IC705, I was finding soundflower’s audio to be jittery via wfview so I headed to using the old fashioned USB port, when it became clear something was not well with the IC705’s USB port. I tried connecting the USB port and different cables to different computers and only with a ‘wiggle’ or a firm pressure applied would the USB port activated. Given the USB port had seen some action and was the horrendous old type, I looked for replacements, I was so glad that it was already available to market.

ihelpu.tech IC705 USB-C board

The ihelp.tech IC705 USB board looks an easy drop in replacement that gives me USB-C and unlikely as it may, protection from errant amplifiers. I’ve ordered one, but it has to come from the USA and I’m not keen on depending soley on the iPhone with SDR-Mobile for making QSO’s.

I spent Sunday morning re-configuring my official IC705 bag with the 705 and ATU in, I headed out to the garden and tested the whip antenna, I was able to make a couple of contacts ! So the whip antenna would work if I needed it to.

IC-705 and Whip antenna performance with FT8 on 17m was not bad, but I do have a spare EFHW for 40m. Whilst its quite ‘bulky’ it still a good antenna, I use the 80m varient as my main HF antenna at the QTH which operates really well in very RF noisey conditions.

So for my next POTA I want to try the EFHW and the IC705 in its back pack, I will probably operate from the Bongo for the first time in this configuration, but am looking forward to using this lovely location to try out EFHW and IC705 !

A new location and a nice tree to use !

Until the next time, which shouldnt be to long to wait, thanks again for all the POTA hunters and other ham radio portable enthusasits that get me out the shack and getting on the air.

73 2E0FWE

July Update

Its been a while since I’ve posted, so thought I’d better put something up ! I’m glad to say that at home my shack has undergone a re-jig and tidy up, things are alot easier to operate.

I’ve been making more contacts with telephony and had a great QSO on 80m with F5VHZ, who is setting up in north France. Its great to have these longer QSO’s and esp on HF.

Meanwhile on VHF/UHF I’ve been monitoring the local gateway and repeaters with my Kenwood 2m/70cm transceiver, its been nice to hear the chat and the repeaters still have some life. There are some interesting conversations, esp to the ones linked to Echolink – which I am very much a fan of – in getting a local service able to speak to people in far distant locations than otherwise would be capable.

I’ve also got the Bongo fixed and re-equipped, mostly I’m driving around sending out APRS packets. I’m trying to work out a way to get a Wifi enabled hotspot in the bongo so i can use the 70cms side for QSO’s whilst 2m is on APRS.

I also had my first ever ‘boot fair’ and sold some of the things from the shack that weren’t getting used, whilst I had a whole load of other gubbings, I had a great time and even made a few quid.

Whilst work and academia are no less busy, i’m hoping with the shack tidy I will get back to going out and doing more POTA.

In the mean time, 73’s and look forward to catching you on the airwaves.

2E0FWE