A very enjoyable POTA

With good weather and wanting to get out to test out the ‘unknown dipole’ I headed out to Bolderwood park in the New Forest. I setup the dipole, first I tried with the mast, but the ground in / around the New Forest is very rocky, so improvised and put the antenna in the trees !

Dipole was still in action in the trees !

This took longer than setting up the Alexloop Hampack mag-loop antenna, but I was keen to see what improvements using a dipole in the forest would bring compared to the Alexloop. I was soon setup on my ‘regular’ bench and on the air, making contacts on FT8 on 17m in no time at all !

Bench with the dipoloe feedline going up into the tree

I was amazed at how quickly I was having FT8 QSO’s, it was one after the other, and changing bands with the MAT tuner, made it very easy. I could hardly write down the backup log for FT4 as the contacts rolled in !

the contacts just kept coming and coming !

I also managed a Park-to-Park with M0OVE on FT4 – a real treat and was really excited. It took no time at all to get enough contacts (< 50 minutes) on FT8 and FT4, the antenna and radio was doing a great job. In terms of operation, I found the dipole much easier to use than the magloop as it didnt require me to re-tune each time.

Having made more than enough contacts, I tried SSTV, whilst reception was excellent, getting out on the busy ARRL contest weekend and a busy SSTV CoA was proving difficult, nethertheless I enjoyjed trying !

a busy SSTV SOA – if it was nt SSTV it was ‘CQ Contest’

I tried for some telephony contacts, but the self-presribved midday cutoff was coming up and packing up would take a little while, so tided up and headed home.

Once home I had to work out how to update my ADIF file, which to the thanks of the excellent POTA website, was made easy, so I can add my P2P reference, sure enough,that uploaded without problem. I was really glad so many my digital mode QSO’s where fellow POTA hunters !

Hopefully i will get out again in March and I can enjoy using another antenna, I think its worth experiementing just to see how much a good antenna and 10W can really do !

Until then, 73 !

A busy weekend ! Dipoles, Verticals and repeaters !

So what a busy weekend ! Having been to Poole Radio club this week and catching up with an fellow member received the necessary advice on how to best install my 80m/40m dipole in terms of location in my QTH.

I then set about building the mast to get the dipole up, its a series of videos, so i put them here in order.

Part 1
Part 2
Part 3
Part 4
Part 5

So TL/DR i didnt make all the progress I wanted, having taken care of my health and not getting too tired, i have ordered a new tilt base for the 33ft mast.

Barenco BE103 on order

The Barenco looks a good bit of piece for the price, if it allows me to tilt a 33ft mast up with ease, worth every penny ! For sure there will be a decent video and review when its installed.

With that the Poole Radio Society on 2M I set about getting my 2M equipment setup. I tried to use the Retevis RT90 but wasnt having much luck with programming and operating it. I got the RT90 as its a good DMR radio and works with my Pi hotspot, but for monday i just needed something simple to use for the 2M net, so i pulled my IC-2200H out and done a factory rest on it.

I was soon on the air with my Yagi and making a great local contact. I couldnt reach the 3rd contact in the QSO on the Isle Of Wight, so over night considered how I would best address this for the monday night net.

J-Pole on 2M

I was really impressed that i got the antenna up in less than ideal weather (rain, wind) and had positive S.W.R. readings

I then set about calling CQ on the 2m calling frequency of 145.500 and was able to make a number of contacts thruout the day.

2m contacts in a variety of good distances in and around Bournemouth

I was really pleased that I was making and having really good conversations with seasoned fellow hams in the area, especially another member of Poole Amateur Radio Society remembered me which was great !

Feeling ambitious, i then set about looking for repeaters. Our local repeater is no-more for at least the short term and no real indication of if/when GB3PBR will return. GB3JB appeared to be just in reach, and i setup the 2200H with the respective frequencies and tones to access it, sure enough I was rewarded with the ‘pips’ that I could reach the repeater !

I monitored thruout the day and enjoyed several really good QSO’s via the repeater, which varied to just down the road (ended up with a simplex conversation off the repeater) to many miles away beyond Dorchester !

GB3JB

I continued to add a choke filter and Y-split to the 2200H so i can use the Yagi and J-Pole should I so wish to.

It has been an excellent weekend on the radio, the shack still isnt as tidy as I would like it, but its getting plenty of QSO and 2m action thats for sure ! I’m looking forward to next week and progressing the 40m/80m dipole some more, it will be excellent to be back on both frequencies again.

Many thanks for all of those that had telephony QSO’s with me this weekend and setting up/checking and giving me loads of info about 2 meter operation in the locality, it really has been great to have a ‘rag chew’ with local operators again.

Stay safe / 73

Alan / 2E0FWE