Category Archives: QRP

QRP POTA G-0362

Posted on by

So today was my first Parks on the Air. Armed with the IC705, THD7 and a variety of antennas I set out early from the QTH. The morning walk with Sweety told me it was a cold day, but mild for January, I still wrapped up warm tho.

  • 3 bags of equipment
  • carried by the trolly
  • PoTA in the trees
POTA in the Trees

I had 3 bags of equipment, but the trolley handled it really well, making it quite easy to get to the location I had planned. I started setting up the end-fed antenna, but sadly my enthusiasm got the better of me and ended up snapping the mast when pulling it up ! I quickly setup on the loop and the THD7 on 2M and was pulling in signals from both. It wasn’t a long wait before I had a great QSO with M7PBT on 2M, so was happy to start with that.

When trying HF I could pull in the signals ok. I got a helpful text from G1TEX who was actively listening to me on the HF bands, but sadly I couldnt make a contact. On Tex’s advice, i packed up and moved location away from the Trees. Again the trolly really helped in moving.

  • QSO Bench
  • First HF Contact
  • Even GPS worked !
  • The setup !
Location #2

Location #2, which was just around the corner, whilst missing a table did have a decent sized bench to sit on and get the equipment on. I could even get me flask out and have a much needed coffee ! Before long G1AJH (Andy) made contact, first on 2M then we coordinated across 17m and 15m, with a weak, but sucssful QSO on 15M. It was just the injection of encouragement I needed to keep going and I continued to persist with calling on 15M, by mid afternoon 15m and 17m had really opened up, I was easily receiving Canada, France and Scotland, trying to break into the pile-ups was really hard work thou, but I kept trying ! Thankfully IT9YAO was amazingly patient and got my callsign and report, I was really made up with making a DX contact on 10W and the loop !

  • bogs on the air
After all that coffee…

After all the coffee it was time for ‘BoTA’ maybe 🙂 anyhow, I could only giggle at the suggestion made on the G4PRS net last week and felt compelled to take a picture 😀 (Actually it shows how well the facilities are maintained at the Park, its clean and tidy for sure)

Conclusion

I got back home and transferred my paper log to ‘Hamlog’ on my phone, so i could create the ADIF file for submission. Whilst I wont activate the park this time, i will at least show the attempt, where currently there are none.

I really learned allot from today and had huge amounts of fun doing it, yes there was some times of frustration, especially the mast and end-fed not going to plan, but that didn’t deter me from keep trying with what I had.

I think for future activations or any kind of testing, its best to go with the whip and one other antenna, I think taking the whip (attached to the bag) and 2 others was to much, as is, I only stuck with the loop in the end, and not even testing the whip, the time went very quickly !

The most important for me today was that I tried and got out with my radio and I can only get better and learn more by keep going out and trying, which is exactly what I will be doing !

Thanks again and 73 !

2E0FWE / Alan

Parks on the Air (POTA) prep – Avon Heath Park ( G-0362 )

Posted on by

I was originally planning my first Parks on the Air (POTA) this weekend, but circumstances changed and I’ve had to postpone the actual activation. Nethertheless I made good use of the time I did have by going to the park and checking it over. Sweety came along and we had a brilliant walk together.

  • Avon Heath Centers
  • Planned health walks !
  • Nice benches near the visitors center
Arriving at the car park

Arriving at Avon Heath Park my Mazda Bongo will not fit into the regular car park due to height restrictions. There is a large parking area for HGV and PSV’s which other campervan/van type had parked in, so I went there. They should really raise the height of the barrier to 2m10cm like elsewhere in Bournemouth & Poole.

  • nice location
  • good diagram/map
nice seating and artistic map

Carrying on from the visitors centre and amenities, there is a nice table/chair next to the reptile and bird lookout. If anything its a great place to sit and enjoy a rest, the pictorial ‘map’ is quite useful as well, but for a full map you can get one in the visitors centre with all the routes. I chose to do the “Viewpoint Trail” which is 3km long.

  • Nice Seat/Table combos
  • Plenty of Trees
  • A great view

Sweety and I didn’t need to go far to find a lovely set of table/chairs, not only surrounded by lovely trees, but also a really nice passage to the next section of the park. The area around the benches has well spaced trees, allowing for either using the trees as a place to hook and end fed antenna up, or to put a pole up between them.

  • signs of things to look out for
  • enjoying a sniff
  • well sign posted route
continue the walk thu the park

The route was easy to follow with well sign-posted arrows to follow, as well as nice posters of the inhabitants of the park. Sweety really enjoyed discovering the woods as well, making plenty of new friends on our walk around.

  • tree-lined walks
  • pleasant hills to climb
  • great views across the heathland
walks and hills

We had reached the furthest side of the planned walk, although not the park which extends further East from where the photos above where taken. Being the ‘Viewpoint Trail’ small diversions away from the trial give places to sit and enjoy the vistas across the heathland. Even on a cold Janurary day, it was a lovely view, and worth to come here just for relaxing and enjoying the scenery.

  • Powerlines
  • Cows
  • and we are back
our trip

Continuing on the pathway I encountered the first real potential problem to operating, that being overhead powerlines. I am unsure if they would interfere with the radio signal by being in the proximity, but of course there is the very real risk to life should the mast fall onto the overhead cables, so that makes setting up in this part of the park a no-go area. We also encountered some very sedate English White Cows, I put sweaty back on his lead right away. Hes pretty good around other animals, but its best to play it safe, we walked by without problem and made it back to the car-park without issue.

In conclusion to the visit I now have a good idea of what I need, or more importantly what i don’t need, to bring with me and the quickest way to go there. Needless to say I’m really excited about coming out and doing PoTA for the first time !

POTA Pre at Avon Heath Park

I then came back home and as time allowed I could test the Sotabeams travel mast I had never setup before, even the ropes had to be cut to length for guying. This was quickly done in the space of my back garden and was really please to get the mast up so quickly and easily.

Testing Sotabeams Travelmast at QTH

Whilst today should of been about going out and operating, I have made the most out of the time I did have, which I think will make my actual activation a really good experience.

QRP Portable + 2M SSTV !

Posted on by

Its been a busy time with radio activities, so much so I’ve barely had time to write up, so today I’m doing two for one !

QRP Portable

So having been inspired by numerous youtube videos to ‘get out the shack’ and being well equipped, I was determined to go out in my Mazda bongo with my QRP setup. The first thing I wanted to do was see if I could use my under-used Alexloop hampack in the Bongo, eliminating the need for any need to be outside of my Bongo.

I tested at home first in my drive way and getting the bongo roof up, IC705 and Alexloop in the Bongo worked well. Receiving signals was not a problem at all !

QRP Bongo QTH

So I asked my fellow G4PRS members a good high location to also do some UHF/VHF operation. I was not be disappointed when Whiteways Viewpoint was recommend by several members. Not only was it stunningly beautiful, and very windy, there was plenty of space to park and setup. I wasn’t alone in operation !

  • stunning views
  • popular with vams
  • across purbeck ranges
Operating from Whiteways

I setup my Bongo, IC705 and Alexloop. Whilst in the bongo I could get the SWR readings down low, but couldnt get my signal out but when putting the loop in the roof, there was some inductance from the small amount of metal in the roof and the SWR would go high.

QRP Operation Day 2 – Whiteways

I had a great time, and was glad that I had brought along my 2m/70cm Kenwood TH-D7, which I was able to put into the external antenna. I was quickly able to have a QSO via GB3IW repeater on 70cm, an impressive distance of 41 miles (approx)

GB3IW (approx) and Whiteways

I then tried out 2M and calling CQ, I was glad to be received by G3TOI in Christchurch who was monitoring during his HF / 80m activites. We have had QSO’s before, and its always good to catch up, but it was great to be so clear and a good report whilst mobile.

I really added to my portable QRP operation experience by this one trip out, I know now that for my antennas they will have to be outside the Bongo. As such I have got a pop-up tent to sit either myself or the antenna in the tent. I’m hoping to do more /M operation on the 17/18th of January – so keep a look out for me on the airwaves !

SSTV 2M

Whislt I still enjoy SSTV on HF (Mostly 20m and 80m) I really enjoy it on 2M also. Being able to use FM and upto 50W from my QTH with the Diamond x7000 antenna means I have the challenge of the terrain but the hope that I will also make contacts.

The SSTV calling frequency (144.500Mhz) is very quite in IO90BS, but I advertised the times I am almost always on via my QRZ page, i.e. 8-9AM on Sunday mornings. Whilst I didn’t get anyone during this specific period, I did leave my 9700 and MSSTV running, sure enough whilst walking in from the garden I heard a signal !

I sat down and had a fantastic 2M SSTV QSO with M0UVM, whose location is not geographically far, but still the other side of a large hill I have between me and Bournemouth Town Centre. I was really happy that someone had taken the time to setup MMSTV and put really good pictures in. We are planning more transmission on Sunday mornings with different SSTV modes and power. M0UVM is using an IC705 and only 10W, so doing really well !

Here are the excellent pictures we sent each other

Received Pictures (by 2E0FWE)

Received pictures by M0UVM

Here is hoping that there is more SSTV on 2M !

Until next time, 73

2E0FWE / Alan

QRP from the QTH

Posted on by

So today is memorable for two things, one is my 28th Wedding Anniversary to XYL Monica. We are so blessed to have each other and I’m so thankful to have an amazing missus who I love so dearly.

Also today I made my first ever QRP contact from my QTH with 10W of power. I’ve had the ‘setup’ for a few weeks, and its been sat under my table (sadly) waiting for a time to go out. Today the weather has been fantastic in IO90, so I seized the opputnity to get out with the 705 in my front garden.

For those who are inclined, here is the setup I used today.

  • Transceiver :- Icom IC705
  • Antenna :- HFJ-350M & CGW-560 Counterpoise
  • Antenna Analyzer :- Rig Expert Zoom AA-55
  • Additionally :- M12 Copper Washer & BD7-Maple Antenna Bracket

I made myself comfortable with a long-used and reliable camping table and as being at home, a soft cushioned chair, which was invaluable for the tuning and waits for the QRP sessions.

I started off tuning the HFJ-350M (350M) for 40M. With the Rig Expert and instructions provided, this was suprisngly easy to get the antenna tuned for the SSB Telephony section of 40m. I started with the measurements from the instructions, and then adjusted the antenna until the SWR was at a good reading.

Tuned into 40m

However with the contest on this weekend 40m was simply full of contesters. I don’t mind on my usual home-rig to take part in contesters and give the 001 serial to give a signal report, but being QRP and for 5-10 with an Italian call sign who was very clear to me, I was unable to complete the contact with my QRP setup.

For interest, I then went onto 20m (14mHz) and found tuning the antenna was straight forward. To start with it was quite close to having a SWR reading of 5-to-6, whilst not good enough, it was better than the ‘infinite’ value, so some fettling with the antenna in slowly sliding and taking a measurement soon produced the whole of the 20m band with good SWR reading for transmission

Again, 20M was full of contesters and I was unable to break the pile ups with my 5W of power. At this time I headed into the ‘shack’ and grabbed my LiFO battery, allow the full 10W of power to be used. I also research non-contest bands and QRP frequency. I found that 17M (18Mhz) was a non-contest band. I was able to use the same method to get a good SWR reading across the 17m band – the antenna was at least matching very well and using a repeatable process I could use in the field.

With some time and patient listening, I heard a call on the QRP frequency on 17M of 18.130, and with of effort with both myself and the operator from Finland listening was able to make my first QRP contact. It was incredibly satisfying with such a low power and compromise setup to make a contact on HF – my report was 5/3 with a very weak signal, understably with 10W and in an urban environment – needless today I was ecstatic to make a contact.

QRP contact video

Whilst I was unable to capture the video (the run time would of been over an hour !) I do capture the unbridled joy of a QRP contact on a portable setup. Hopefully I will be able to make more trips to less RF noisy environments as I thoroughly enjoy QRP operation as it gives a fantastic sense of satisfaction in making contacts with such small amounts of power.

A summary mini-update

Posted on by

Hello there ! Well its been a while since i sat at the desk to do a blog-posting rather than a video and of antenna related results, so this evening I thought I would return to the blog and give a summary mini-update of what I have been upton !

How do I approach this.. hmm, well, lets go for by bands of operation and then methods as a subtext !

HF Operations (80m to 10m)

Well I have mostly been busy on improving the performance of my main 6BTV antenna, this is following a fantastic field trip with G4PRS (Poole Radio Society) to have a great day out and with so much learning about antennas.

As an outcome of that, I decided to improve my 6BTV and understand more about the tools that I have. I’ve made several fundamental changes to my 6BTV and initial results, well, are seeming promising. I have yet to take the X&Y measurements I wanted to take due to the inclement weather, but I think that will be this week.

I have been doing more and more telephony work on 40 and 80m. 40m via the IC-7300 and 80m via the Kenwood TS-690 into the excellent UK Antenna 80m multi band end-fed. Although its below its optimal height, it is functioning brilliantly.

Specific Modes – FT8

You would of seen from my QRZ page I used to spend allot of time on FT8. It is an interesting and exciting mode to start making contacts with. I found myself wanting more thou, so I found another digital mode to move onto. I am still doing occasional FT8, but really for what it was designed for in my opinion, getting signal reports and checking propergation/antennas, rather than solid FT8 only.

Specific Modes – SSTV (HF to start with)

I have been enjoying SSTV massively on 20m (14.230USB) – you will see on this site my most recent received images uploaded to the SSTV section. I use SSTV early and the early evening (grey line times) during mon-fri and where i can during the weekends. I have had some fantastic contacts and enjoying the pictures / QSOs massively. It is very rewarding to get a good 595 / P5 report from another operator well into DX terrority.

sstv contact from OK2ZCH

I continue to enjoy SSTV in making great contacts, I hope you could be my next one !

Specific Modes – Telephony on HF(voice)

Whilst on UHF/VHF I tend to be more comfortable with the longer QSOs via repeaters and even simplex on 2M, I still find HF QSO’s challenging, but very rewarding. At home I’m limited to 50 Watts, and when up against even legal full licence holders who can typically run 100W+ making a QSO and getting a good report, is really rewarding – lets not start about the Italians who are doing a great job of warming the atmosphere in what seems like an almost unlimited use of power of the HF airwaves.

I am doing more telephony on 40m and 80m recently (Sep/Oct 21) and really enjoying it. I’m using N1MM as a logging tool, which really helps me get the call sign down – i still don’t mind asking multiple times for a call sign until i get it right thou ! I have had great contacts with the ‘secret nuclear bunker’ and also Germany – I’m hoping the solar cycle continues to improve propagation on 40m

Specific Modes – Telephony on VHF & UHF

I use my IC705 on occasion from home on 2m and 70cm. I am very lucky to get into Southampton and the Isle of White very easily from my QTH in IO90BS. This gives me the opportunity to what must be one of the best repeaters on the south coast, namely, GB3IW. This repeater has excellent coverage with people connecting to as far west as Somerset and as far east as Brighton, inland I have heard people from Uckfield, Haywards Heath and also closer to my QTH in Bournemouth. I can take one of my handhelds out with 5W of power and get into it, with varying signal reports. From home with the X50 and 10W I am always 5/9+10 without problem.

I am working on a packet radio project for 2M based on the excellent Kenwood TH-D7 and the raspberry Pis I have. I am also into setting up a local ‘SSTV’ night,so if you in/around IO90BS and hear SSTV on 2m, it can well be me !

QRP / M / P

I continue to use my IC-705 both at home and mobile as a QRP transceiver. I have no interest in adding an amplifier to this fantastic and amazing transevier. For me QRP is almost becoming a sub-hobby in its own right. I have several very exciting antennas to use /M and /P and (/PP)

I’m hoping in the autumn and winter months to get out more with the IC-705 and my other UHF/VHF handhelds for some exciting and interesting field experiments.

Conclusion

Well I am keeping incredibly busy, its my final year of my MSc and am enjoying a new contract with a fantastic team who keep me wholly engaged thruout the day. I do hope to return to my local club when i can safely, until then i am keeping in touch with several of the members via email and hopefully when the weather gets better, back on the 2M net !

I have probably gone on for too long due to absence of recent postings, but thanks for reading and staying with me. I am hoping to do more frequent updates, no matter how busy i get, even if its just a short write up with some theory and application.

Until then take care, stay safe, and enjoy your radio.

Alan / 2E0FWE

2E0FWE /M Day

Posted on by

So after a rather nice lay-in I headed off to hengistbury head with Sweety, Kenwood TH-D7 & VC-1, Baofeng UV-5R and with the IC-705 setup to receive and upload photos at the QTH.

It was a lovely start to the day with great weather. Coming later in the day sure does get busy down there, but it was nice to see so many people out and about.

  • packing the equipment
  • nice weather
  • the uv5r with rats tail
  • th-d7 with PG-4V
/M VHF/UHF kit box

It was great that everything fitted nicely into a compact box, which I carried on a backpack with some water. I think i will bring a small box/bowl for sweaty next time as well as some ‘treats’.

Here is setup video, apologies for the windy noise, goes with the area and using a phone. My bag tried to make an escape as well, but i caught it ok 🙂

The other reason i come to HH is that it has enough hills and a decent length walk to give me some decent exercise, i don’t mind saying my knees and legs really feel it, but I’m glad to push myself that little bit and am rewarded with some great views and operating conditions.

  • lovely views from HH
  • sweaty enjoying a rest
  • he loves a good run
enjoying HH with Sweety

We reached the far-end of HH (from the car park perspective) and I set about checking the results of the SSTV` broadcasts I had made, unusually I couldn’t see any at all ! Not even static.

no sstv, but contacts on GB3IW

I packed the Kenwood equipment away and kept the UV5R in my pocket for any simplex contacts. I called CQ on 2m (145.500) and had a great QSO with G3TOI who was working thu his great 2M VHF home-brew antenna. We had made contact before but when i was at home on the IC-705 and Diamond X-30, it was great to make a simplex contact on 5W /P.

What had happened ?

Coming home it was clear what had occurred ! I must of knocked the transceiver when leaving and it was set to 144.375 for receive – doh ! Anyhow, glad it was a simple issue rather than anything untoward.

2nd set of field tests – West Howe

I headed back out in the afternoon as XYL was at a training course, which gave me 2 hours to do some local tests. I headed out to West Howe and made a good contact back to the QTH

  • P3
  • P2
Can see call sign and make out location

Whilst not P5 quality, i can at least see the picture and where I am, so I’d say that was pretty good on 5W and about 2-3 miles from the QTH.

I then headed off to Poole Harbour, sadly (and predictably) no SSTV contacts, i think 5W and the dip is asking a bit too much, however i did have a great QSO via the GB3IW repeater on the UV-5R

Improved results from Poole Harbour on the GB3IW repeater

Having driven around west of Poole to higher ground, i could still not make contacts, it was interesting trying tho. In some locations i could still make out the GB3IW repeater as well, and this well in-land. My first good retest was at the Kwik-Fit at Bear Cross.

Bear Cross

The image came out pretty well from about 2.2 miles away.

quick fit at bear cross

I then continued driving towards Hurn and the final test location of Ringwood.

  • Herne Village great
  • Ringwood static
/P Hurn good, ringwood static

The results from Hurn are very good, a P5 image quality from about 2-3 miles away. Heading to Ringwood did get a receive, but only static in terms of the picture. As I know where it was taken I can make out features, but with no call sign and clear image, its not useful as a radio amateur.

results 2nd time out

Results 2nd time out with the TH-07 and UV-5R was much better than in the morning now that the IC-705 was in tune to the /P transmit frequency. Optimal results seem to be around 2-3 miles currently based on the reception of images.

I think the best/quickest upgrade will be swapping out the TH-07 stock rubber duck antenna and returning to the locations where I had static to see if there is any improvement in reception from the QTH.

Thanks again and 73 ! 2E0FWE

Mobile at last ! New Forest Trip

Posted on by

Having owned the IC-705 for quite some months this was my first time to take it portable. With the weather looking slightly dodgy our group of friends headed to Boulderwood in the New Forest.

Our risk taking with the weather was rewarded with a fantastic, albeit slightly cooler than of late, evening in the New Forest.

Portable in the New Forest in Boulderwood

It was great to go with a friend as although the setup was minimal a helping hand was greatly appreciated. I attached my Alexloop Ham Pack antenna to my Buddipole mast with a bungee which done an excellent job of keeping it secure

bungee, buddipole tripod/mast and ALexloop hampack = nice secure setup

I brought along a couple of fold up tables, one for the ladies ot have their pic-nic on the other for me to setup my radio. I started with just the IC-705 first and tuned to 20m. The quality of the signals away from the QRM of my QTH was simply amazing.

Receive singals where really strong and clear – absence of background noise (QRM)

I did try to reply to the CQ calls, but couldnt get a response this time, but was nethertheless glad to just be trying.

Operating the the Alexloop Ham pack was everything it should be, really easy to tune into the frequency. I was getting SWR of 1.3 to 2 on all the frequencies i tuned. I dare say I could get better as I get more expericned with it, but the gauge on it is fantastic.

Resonence LED in full effect on 20m

As seen in the picture above the LED on the tuning unit shows the power/matching of the antenna to the transceiver. I also used the SWR meter on the IC705. I did bring along my rigexpert (HF) but didnt need it in the end.

Having run 5W on the internal batttery, i then switched to a Lifo battery and got the full 10W portable. My connections to the battery need improvement, but are functional.

I was able to test FT8, and received plenty of signals from around the world. I explained to my friend how FT8 works and our signals on PSKReporter. It was amazing how far we was getting out on 10W and the Alexloop !

2E0fwe portable from the new forest reaches far !

I was unable to make a contact, but I was still gald to be getting out. I need to learn how to adjust the volume control on my linux laptop, as the signal was overloading, i suspect i missed some DX/RX opputnities.

Next we tried WSPR – with the portable battery it was no problem to keep going. I checked the database and my own site and could see that we was getting out nicely, albeit with 10W which is probably the most power I have ever used on WSPR.

WSPR mobile

I must rememer to update my callsign for Mobile operation next time as I only changed it later in WSJT-X.

After digital modes and with the sun / grey line coming in I made one more try on telephony just calling CQ, but alas no responses. I dont feel disappointed, i had limited time and wanted to make sure we got back home all feeling well and having an enjoyable evening, so packed up. Again having a friend help was great, everything was put away with no damage and easily into my camper van.

This was a great first experience of being portable. I really enjoyed it and am sure to keep on trying and will probably make Boudlerwood my goto place. If you ever see me there, dont be shy and am always happy to talk to people who are interested.

Having a great time in Boudlerwood, New Forest with the IC705 and Alex Hampack

This has really added so much more to this already amazing hobby. I can thorougly recommend portable operation !

More vidoes next time, but until then 73

Alan / 2E0FWE

AlexLoop hampack !

Posted on by

Just a quick one really ! I’ve got an AlexLoop here, and cant wait to try it out.

I saw this excellent video from Waters and Staton

Alexloop Hampack

I was just wow, got to have one, but the price, eek, thats scary, but look at the performance in video i was conviinced this is the right portalable/QRP antenna for me. Ironically W&S didnt have any in stock (step in Nevada) who did, and wow, it was here quick !

  • that tuner is solid and smooth
  • smart and great looking rucksack
alexloop

The eagle eyed of you would see a number of books on my desk as I’m currently very busy with my AI&Game Design module of my MSc, i’m hoping that I will get enough time to have a play with it over the weekend. I’m super excited thats for sure !

QRM / Tidying the Shack

Posted on by

So for the first time in a VERY long time (aka YEARS) I’ve had the luxury of a week off work. During the week I found a USB extender was producing a horrific amount of QRM. The offending item has since been disconnected.

I went on to survey my ‘shack’ and that I had ‘allowed’ QRM to ‘sneak’ back in. I was a bit disappointed in myself to be honest as I had spent allot of time and money on virtually eliminating interference, both man-made and natural when I had my TS690S setup as my only station. I was just not paying attention to what I was putting in the shack.

So to make up for my lack of attention, I wanted to understand why this had come about. Mostly the biggest problem is the ease to just add things in and not test them, only to find out they are ruining a hobby I really love.

QRM Identified via KiwiSDR

Looking around the shack I really noticed how even tho I had moved much of the music equipment out, it was still as not as organised as I would like it. Did I need all these computers ? Do I use them regularly, is my setup optimal in terms of service ? For many of the computers, especially my older mac, i really no longer needed it and many smaller projects have come and past.

I looked around our whole house and many things had changed since we moved here, so maybe it was just as good to take a holistic look and think ‘how can i solve this’. With that I rented some storage space nearby.

Storage space not far from the QTH

I was really able to take a big “bite” out of all the things around the house and no longer using. I wont share the pictures on here as its not strictly radio related, but fair to say I made good use of the space and freed up alot of space around the QTH.

This in turn allowed me to think about back in the shack. How can I get desks/working areas tidy and serviceable. I’ve been using computer tables mostly that dont really have the best storage on them, leading to problems of not putting RF chokes on them and ensuring the QRM was reduced. I put too much trust in the power strip RF filter to think it would fix all my QRM issues – obviously it would not.

First call – Ferrite, lots of it and the right sort. Whilst I have VHF/UHF transceivers, allot of my work is on HF. I researched the best ‘general’ ferrite for HF, and think that FT140-43 will reduce/eliminate the RF from getting in and out of the devices. With that I ordered 40 FT140-43 from Qubits. Now *everything* that is in my shack will at least have these ferrites on the power supply/leads, if not more.

I then looked at the desks. I need them to be serviceable. The power-tray racking helped, but I was still having cable management issues, and as us radio operators know, having loops of wire here and there is a great way to introduce unwanted QRM into the shack.

I ordered these Garage Shelving Unit from Amazon which can be split to make a nice height desk and storage space, reducing the amount of ‘wire tangle’ and allowing me to have small boxes to tidy things away.

I’ve also got Aluminium Foil Tape to cover the working surfaces with to ‘bond’ transceivers to desks. This had worked really well when i done it with my TS690S and having the cables from the transceiver neatly on the metal conductive surface the cables was reduced loops massively.

  • The offending USB extender
  • everthing removed, QRP massively reduced
  • Portable radio great for hunting
QRP Hunting

So I will have a very busy weekend coming up to finish up my ‘week off’ but hopefully a shack that is not only free from QRM, but is also tidy and serviceable. I promise to upload pics 🙂

Stay safe, keep well.

Alan / 2E0FWE

Books and bits&bobs !

Posted on by

Nebula tilt base progress

Was very greatful to receive an email from Callum regarding the tilt base giving some advice and alternate parts, suggesting the Barenco BE211//2. Myself and JTB (read previous post) are already planning on a ‘metal’ upgrade, so will hold off the BE211/2 for now.

barenco BE211/2

Having watched the ’tilt’ base created by Callum I ordered the parts I didn’t have, and these have since arrived !

  • girth on that wood
  • bolts and washers

I ordered online for limiting my exposure to other people, but having seen the wood am very glad I did ! Not sure why, but it seemed alot bigger than i imagined – which is good. I have an old pallet in the garage which i think will help with the remaining wood components. I will have to source a pole of some type for mast to go onto, but am glad the wood and bolt/rod have arrived !

QRP

  • QRP Books
  • Morse keys and trainer
QRP Boooks and Morse Keys & Trainer

The IC-705 has really got me into QRP, given that without any additions, its max portable power is 5W and 10W when powered from external supply. I watched Peter Parkers’s excellent QRP Video and knew i had to also read these books to really understand and get the most out of what was being taught

QRP Presentation by VK3YE

Needless to say, I’ll be blogging extensively about my QRP experiencs with the 705.

CW Academy

Further to recommendations on DX Commander Discord server I have signed up to CW Academy and book my space on the BEGINNER CW class. It does mean ‘waiting’ until April, but having seen this excellent video about learning from CW Academy, have done well in getting a slot as early as that !

I’m really confident that with tuition from CW Academy and giving the commitment required to learn, i will go from 0 wpm to at least 10 wpm.

Full licence

Also learned that the FULL LICENCE is now available on-line ! Of course i wanted to book straight away, but the latest that could be booked so far was end of Feburary. Given my ‘Intermediate’ exam i thought i would really have to commit and revise well, so I didnt book yet. However, i have bought the RSGB Full Licence Manual, which looks slightly less scary than it would of a year ago (Just passed Foundation).

It begins ! I think with my workload & uni, its going to be 4-6 months of training

This great video gives a recent full licence experience, and i will be taking on the advice

full licence exam experience

With the absence of clubs, training again will be online and with youtube, I’m really grateful for the amount of work people put into their training videos. I will be using Cornish Amateur Radio Club – they really helped with my intermediate

I continue to enjoy the 40m dipole, getting contacts all over the world on FT8 and decoding Wefax images. Hopefully the sun is out this weekend so cutting the wood can begin for the Nebula swivel mount !